用于电弧检测的电力专用SoC设计

针对传统的电弧电路故障检测结果不准确的问题,设计用于电弧检测的SoC系统,并且在55nm工艺下进行流片验证。采用包含两种结构的模数转换器的片上电压源,设计了锁相环以及复位电路,精度最高可达8.67 bit。验证结果表明,本设计可提高电弧检测的准确性。     

基于四埒西水闸及泵站工程施工方案

为解决四埒西水闸及泵站工程施工中存在的问题,对四埒西水闸及泵站工程、工程地质条件及水文地质条件、主要工程地质问题评价及处理措施进行研究,提出了工程施工组织以及工程施工方法,以期为相关工程提供参考.     

Lactobacillus Gasseri LGZ 1029 in yogurt: rheological behaviour and volatile compound composition

Yogurt preserves and enhances nutritional value of milk. In this study, we have compared several strains to determine the physicochemical, sensory, rheological and aroma characteristics of different yogurts. We used Lactobacillus gasseri LGZ 1029 (LG), commercial probiotic L. rhamnosus (LGG) and traditional fermentation strains Streptococcus thermophilus and L. bulgaricus (SL). Results showed that the flavour and texture characteristics of mixed-strain yogurts were obviously better than in single-strain yogurts. Addition of LG increased pseudoplastic behaviour, as shown by Herschel–Bulkley model analysis of rheological behaviour. The LG + SL group also had both the highest viscosity consistency index and thickening ability. In addition, a total of 57 volatile compounds were detected in yogurts and the fermentation with the addition of LG was mainly affected by ketones. Our study suggested that a yogurt with new attributes can be produced by using LGZ 1029.     

城市排水管网风险评估研究

总结了常见的城市排水管网风险评估的方法及软件,对污水管网的气体爆炸风险、雨水管网的内涝风险、综合风险这三类风险评估的文献进行了归纳整理,并对未来的研究重点及趋势做出了预测。     

Damage evolution in polymer due to exposure to high-pressure hydrogen gas

The use of hydrogen as a fuel is increasing exponentially, and the most economical way to store and transport hydrogen for fuel use is as a high-pressure gas. Polymers are widely used for hydrogen distribution and storage systems because they are chemically inert towards hydrogen. However, when exposed to high-pressure hydrogen, some hydrogen diffuses through polymers and occupies the preexisting cavities inside the material. Upon depressurization, the hydrogen trapped inside polymer cavities can cause blistering or cracking by expanding these cavities. A continuum mechanics–based deformation model was deployed to predict the stress distribution and damage propagation while the polymer undergoes depressurization after high-pressure hydrogen exposure. The effects of cavity size, cavity location, and pressure inside the cavity on damage initiation and evolution inside the polymer were studied. The stress and damage evolution in the presence of multiple cavities was also studied, because interaction among cavities alters the damage and stress field. It was found that all these factors significantly change the stress state in the polymer, resulting in different paths for damage propagation. The effect of adding carbon black filler particles and plasticizer on the damage was also studied. It was found that damage tolerance of the polymer increases drastically with the addition of carbon black fillers, but decreases with the addition of the plasticizer.     

Chirality‐Based Biosensors

The fabrication of chiral nanostructures gives rise to characteristic chiroptical activity, which can be used for chirality‐based biosensors. Great progress is made in the use of nanoassemblies for the construction of chiral nanoparticle dimers, pyramids, helices, and twisted structures, and their chiroptical activities correlate with diverse structural geometries and enantiomeric configurations. In DNA‐hybridization‐based chiral nanoassemblies, the assembly parameters, such as the components, gaps, multicomponents, and the aftergrowth of metal, can result in multiple bands and enhanced chiroptical effects. Based on known chiral nanostructures, the existing chiral nanoassembly‐based biosensors together with their targets and signal amplification strategies are reviewed. Chirality involves multiple signals, and multitarget biosensors are introduced with newly developed chiral architectures for the accurate and reliable monitoring of biomarkers in living cells. The interactions between chiral nanoarchitectures and biosystems are also highlighted, which are important not only in the chiral dynamic switching of nano‐objects for biomonitoring, but also in manipulating cell growth, proliferation, and adhesion. The future perspectives on chiral fabrication and its use in biosensors are also comprehensively discussed.     

退火温度对冷轧DP980钢力学性能的影响

利用连续退火模拟机对DP980试验钢进行了连续退火试验,并通过扫描电镜、电子背散射衍射、透射电镜等研究了不同退火温度下(775、800、825和850 ℃),试验钢显微组织的演变规律和力学性能的变化趋势。结果表明:试验钢的屈服强度随着退火温度的升高而不断增大(从705 MPa增大到850 MPa),抗拉强度和断后伸长率则随着退火温度的升高而不断减小(抗拉强度从1150 MPa减小到1030 MPa;伸长率从8.9%减小到5.3%),这与试验钢的显微组织构成和形态分布密切相关。此外,不同退火温度下,试验钢的加工硬化率曲线均呈现单调下降的趋势。     

大统矿业超高水充填开采制浆系统设计研究

煤炭作为我国的主要能源，在国民经济发展中具有不可取代的作用。矿井面临资源枯竭的困境时，尽可能多地采出煤炭是企业存续发展的当务之急。山东省兖州市大统矿业有限公司杨庄煤矿九采区3煤层1997—2005年进行了开采，由于受当时设备和技术的限制，仅回采一分层2.2 m。为挖掘企业潜力，充分利用煤炭资源，采用超高水充填法开采剩余分层和浅部煤炭资源。结合矿井实际情况提出适应矿井的高水充填系统布置方案，在地面建设制浆站，通过专门的设备将材料骨料制成浆液，然后运用管路将浆液输送至采空区进行充填。超高水材料制浆充填系统可服务于九采区全部充填工作面，每小时制浆生产能力为320 m³，每天生产1班8 h，约2 500 m³ 可以满足2个工作面的充填开采需要，极大提高了制浆充填效率，取得了良好的效果和经济社会效益。     

早冠丝瓜406新品种的选育

早冠丝瓜406是以S4为母本、X06为父本配制而成的一代杂种.极早熟,植株主蔓分枝性强,生长性强盛;雌花节位低,首朵雌花着生于主蔓第5节~7节,采收期为播种后58 d^60 d开始;嫩瓜呈长棒形,果端较圆,果皮深绿色,单果重0.5 kg^0.9 kg,果实纵径42 cm^50 cm,横径3.7 cm^4.2 cm,前期产量为16772.0 kg/hm^2,总产量可达47447.5 kg/hm^2.适合长江流域、云贵高原及湖南地区早春设施和露地栽培.     

Quantitative determination of pore-structure change and permeability estimation under hydrate phase transition by NMR

Quantitatively characterizing the seepage features is critical important for multi-fluid flow in gas hydrate accumulations; however, limited researches concern water permeability during hydrate phase transition. In this work, nuclear magnetic resonance (NMR) measurement is employed to observe the in situ formation and dissociation of tetrahydrofuran (THF) hydrate in porous media. Results indicate that the relative free water and bound water consumption during hydrate phase transition can affect the seepage features of sediments. In addition, we investigate the growth habits of THF hydrate in quartz glass sand and find the growth pattern of the hydrate transforms from suspension to cementation when its saturation exceeds approximately 35%. The Tokyo model shows that the hydrate are heterogeneous distribution of pore-filling and likely to evolve in larger pores; The findings clearly show that NMR is an efficient and direct technique for investigating the seepage characteristics during hydrate phase transition as well as pore fluid distribution in sediments.